Macungie, PA
Total Fluids Recovery and Treatment System with Wireless Internet Controls

Product Level Control was responsible for the design, construction, installation, and startup of a 200 gpm water treatment system required at a Pennsylvania tank farm. The completed system included three sea containers plumbed and wired together on-site which house oil water separator, air stripper, six 3000 lb liquid carbon vessels, bag filters, product tank and manifolding. Two 10,000 lb vapor carbon vessels were supplied for off-gas treatment. In addition, PLC fabricated a total control and monitoring system accessible via wireless Internet.

Levelland, TX
Master Control System and Visualization Software

Product Level Control was responsible for the design and fabrication of a master control system with industrial visualization software to monitor and control groundwater and soil remediation equipment at a Superfund site in Levelland, TX. The completed system included a motor control center, 25 remote telemetry units (PLC's), and five VFD transfer pump panels. In addition, PLC custom-designed graphical user interface (GUI) software to allow operating personnel to quickly and easily perform system functions.

Product Level Control was responsible for interior equipment and controls required for a water treatment project in New York. The treatment equipment included submersible pumps, sump pumps, transfer pumps, holding tanks, tank mixer, oil/water separator, bag filtration, Siemens Total Treat® Continuous Precipitation System, liquid carbon polishing, and odor scrubbers. In addition, PLC supplied instrumentation and fabricated the control system for supervision and management of the water treatment equipment.

Selma, NC
Bio-Sparge System

Product Level Control was responsible for the fabrication and startup of a turnkey bio-sparge system required at a Kinder Morgan site in Selma, NC. The completed system included a three room building to house a Kaeser rotary screw air compressor with integrated refrigerated air dryer, 28-leg dual-zone air injection manifold and Sitelink II™ telemetry system featuring touch-screen controls. The building was subject to a third party electrical inspection and PE certified per North Carolina code.